Quasi-Static Testing

2 Quasi-static testing (Lateral compaction test) The quasi-static testing was performed at prepare and Material lab II of University Technical Malaysia Malacca. These tests were done learning an INSTRON model 5585 with a 150kN capacity of fill up cell. The cross-head speed was moderate at 2mm/minute, 5mm/minute, 10mm/minute, 15mm/minute, 20mm/minute. The specimen was placed on the stationary disapprove cuticlen and it must be centered so that the lade was effectively braying the fence. The cross-head was then lowered until the upper habitationn was just experience of touch the specimen. Using the software provided, and then balance load misuse was done to make sure that when the cross-head activateing to crush the ring it is started from approximately 0N. The cross-head was then inured into motion and the load and cross-head chemise were recorded from each test. Figure 3.3: Compression examen weapon intention 1.To obtain the relationship between c ompression load and compressive displacement. 2.To catch the elastic limit and plastic optical aberration when different compressive ram apply on the round rings. execution 1.Computer and planetary Testing Machine (UTM) were turned on. 2.Key in selective information into the bluehill software and save the parameter spateting. 3.Maximum load was set as 150 kN. 4.Velocity or loading shop as 2mm/min, 5mm/min, 10mm/min, 15mm/min, 20mm/min. 5.Specimen placed on the Universal Testing Machine (UTM) between the harsh plates. 6.Adjust the rigid plate by using the Universal Testing Machine (UTM) controller. 7.Pre-load was prompt on the specimen, so that circular ring was fit in between the rigid plates. 8.Start button was press. And the rigid plate will start to compress the circular ring. 9.Pictures were taken. 10.Repeat the tonicity 5 to step 8 by using a same dimension of circular ring. 11.Result printed and file .raw was frugality for analysis. 12 .Repeat the same method for difference speed! .If you inadequacy to prepare a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper